otomatik kepenk HOME ABOUT US CONTACT PRODUCTS REFFERENCES GALLERY
 
 
 
TÜRKÇE
ENGLISH
SLOVENSKO
HRVATSKI
 
 
 

Garage door sistems

otomatik kepenk
All tracks, support angles, hinges and roller brackets are designed to suit project requirements. A PVC weather seal is fitted to each vertical track assembly. Standard 2” nylon guide rollers give smooth, quiet operation. A galvanized steel shotbolt is fitted ass standard at one side of the door. Push-up doors have a lifting handle fitted to the bottom panel.

Each panel is formed from two galvanized steel facing sheets, bonded together with a fire resistant, CFC-free foam core. Inside facing sheets are stucco-embossed and finished in bright white polyester. Outside facing sheets can be stucco embossed with polyester finish or smooth with Plasticol finish, in colours from our standard ranges. Panels can be factory painted any RAL or BS colour.

 
 
 
More about garage doors
 
 
 
 
LARGE SIZES

Doors up to 12m² can be push-up operated. Over this size, manually operated doors are supplied with a chain hoist with reduction gears and zinc plated hand chain.

 

ROLLING SHUTTER DOORS
Available in aluminium, steel and stainless steel, these doors prove themselves in daily use again and again.

go to gallery >>

SECTIONAL GARAGE DOORS
The modern and elegant sectional door opens vertically upwards. As a result, you gain space in front of and inside the garage!

go to gallery >>

 
 
Frequently Asked Questions
 
Can I still open/close my shutter in case of power breakdown?
Of course you can. You should open the box mounted on the wall near the shutter with the key given during montage. While you turn the handle in the box to the opposite direction by 180°, shutter can be lift by hands and you can lift it with your hand force by holding the shutter from its both sides, or, handle the bottom side of the plastic mechanism hanging down near the shutter, and you should turn the plastic component on the top of this mechanism counter-clockwise. After the shutter is lift enough, you should bring the handle to the previous position. When the power cut ends, you should follow normal use process. After manual use do not forget to bring the mechanism to the previous position, and lock the box.

My shutter desn't work, what should I do?
Check out whether your remote-controller works or not. Press the button on the remote-controller. In case of weak or no signal, change battery. If your shutter works with button or switch, control the electricity. Check out electricty network; main fuses, shutter fuses, electricity cables, fuses on controller pane.

 
 
 
Most common keywords: rolling door systems, rolling shutter systems, window shutters, rolling door shutter fixing, composite panels, alucobond composite, rolling shutters colors, automatic doors, slide doors fixing, wood composite, door systems, changing rolling shutters
 
 
  2012 © A-door Otomatik Kepenk ve Dış Cephe Kaplama Sistemleri